JMD Handy Baby Key Programmer Handy Baby CBAY For 4D/46/48 Chip

Language: English/Chinese/Spanish/Russian

This Device can't work together with CN2 Chip or CN1 Copy 4C Chip, you need use the particular 4D chips, such as this ID46 Chip

Update Free Online on Offcial Website

Latest Version : V6.1.0

Handy-baby 6.1.0 update info:   
copy 4D70-dst80  ( For KIA and For Hyundai)
chip transfer
more types of chips generated
more detail information about chips

Attention: JMD Handy Baby cloner has G Function now, if you want to get this authorization, please click G Function Authorization for HANDY-BABY

Key Copy Programmer Recognize and Copy:

Recognize: Recognize chip 13, 40/41/42/44/45, 4C/46/48, 4D61/62/63/67/68/68﹢/71. Able to tell if 48 chip is from original or deputy factory.
Copy: Copy 46, 4D and a partial of original 48 I.E Buick Excelle, you have to use special GMT46/4D Chips, ID48 chips which can change ID. Handy Baby Hand-held Car Key Copy Key Programmer for 4D/46/48 Chips

Operation steps:

Turn on: long press the "On" button.
Turn off: long press the "On / off" button or "On / off" and "OK" button
Steps to operate: follow the tips on the screen, put the original key into the coil, press "OK" to recognize.

Take chip 46, 4D and 48 for example.

Steps to copy 46:

1. Press "OK" to decode
2. Make antenna close to coil
3. Insert and turn the key (collection)
4. Put original key into coil to decode
5. Put new key into coil to copy
 
Steps to copy 4D:
 
Press "OK" to decode, then put new key into coil to copy.
 
Steps to copy 48:
 
Press "OK" to decode, then put new key into coil to copy.
Key Copy Programmer Initialize:
Please use with caution: only available for JMD46 / 4D and revisable UID48 chip. The data won't be restored after the chip erased.
Enter program, select the chip type, press "OK" to restore to factory settings.
Key Copy Programmer Test Frequency:
Steps to test the key remote frequency: Enter program, make key close to the surface of left button, meanwhile press remote button, then the frequency will display.

Key Copy Programmer Data read and write:

1) Read and write 46 chip

1. Please select correct chip mode and password in order to read & write chip correctly. The device default chip mode and password is 46 chip blank.
2. Select chip mode: move mouse cursor to "Mode", I.E "Plaintext mode", press "OK", the fonts turn black from white to indicate the selection mode, press "Up" and "Down" to select the Plaintext mode or password mode.
3. Enter password: move cursor to the password box under the mode, press "OK" to proceed, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to transfer password.
4. After finish press "OK"to exit, then move cursor to "Read all" to read out data.
5. Read all: read out all data for 46 chip and display the status of locked or unlocked.
6. Write: write the corresponding data; make sure 46 unlocked before writing data.
7. Enter data: the way to enter data is as the same as to enter password.